Phison’s 1.8”/2.5” PATA Solid State Disk (SSD) is a non-volatile, solid state data storage system, and has become a more popular storage media solution, compared to conventional Hard Disk Drive (HDD). Due to lack of any mechanical components, SSD provides a more robust and cost effective storage solution for any embedded application. Since SSD comes with a standard ATA interface which is fully compatible with traditional HDD, designers will find 1.8/2.5” PATA SSD as an easy solution for integration in PC-based systems.
Available in 1.8” and 2.5” form factors
Supports host interface with IDE (PATA)
ATA command set compatible
Provides 4-channel performance1 for both SLC/MLC-based flash memory
SLC2: Read/Write (MB/s) = 85/80
MLC3: Read/Write (MB/s) = 85/65
Max. capacity up to 256GB (1.8") and 512GB (2.5")
Intelligent ATA/IDE Module
Built-in embedded flash file system
Implemented with both dynamic and static wear-leveling algorithms to increase endurance of flash media
Strong ECC hardware design, correcting up to 68-bit random error per 1K byte
Both commercial/extensive grades are available.
The results are based on HDBench with Phison’s latest PATA controller – PS3016-P9 + Windows XP.
Based on Toshiba 24nm 4K SLC
Based on Toshiba 19nm 16K MLC
2.5 Inch PATA SSD : PS3016-P9 2.5 PATA SSD simplified datasheet.pdf
1.8 Inch PATA SSD : PS3016-P9 1.8 PATA SSD simplified datasheet.pdf