Industrial mSATA

Discription

Phison mSATA delivers all the advantages of Flash Disk technology with the Serial ATA I/II/III interface and is fully compliant with the standard mSATA form factor, known as JEDEC MO300 standard. The module is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 64GB for SLC application. Moreover, it can reach up to 500MB/s read as well as 140MB/s write high performance based on Toggle 2.0 SLC flash. Meanwhile, the power consumption of the mSATA module is much lower than traditional Hard Drives.

Product Specification

 Solution

PS3107-S7

 PS3108-S8

 PS3109-S9

 Capacity

1GB~128GB

2GB~256GB 

 1GB~256GB

 Compliance

SATA 2.0

 SATA 3.0

 SATA 3.0

 Flash Memory

SLC/pSLC/MLC

 Performance (Note1)

Read: up to 190 MB/s
Write: up to 185 MB/s

 Read: up to 520 MB/s
Write: up to 380 MB/s

 Read: up to 525 MB/s
Write: up to 200 MB/s

 Power Consumption (Note1)

 Active mode: < 825 mW

 Active mode: < 3,560 mW

 Active mode: < 2,000 mW

 General Applications

Storage, Recording, Back up, Boot device, Database in Server, NAS, SAN, Surveillance, Industrial PC/machines

 Operating Voltage

 DC 3.3V

 Operating Temperature

 0°C ~ 70°C (Silver)
-40°C ~ 85°C (Diamond)

 Reliability (Note2)

IEC-60068, IEC-61000, MIL-STD-810, ISTA 2 Series

 MTBF

More than 1,000,000 hours

 More than 2,000,000 hours

 Quality

Products are tested with both operational and non-operational status to ensure the highest qualities.

 Features

DEVSLP mode, Static/Dynamic Wear leveling, Error Correcction Code (ECC),Power Loss Protection, SMART Function, TRIM, Over-Provision, pSLC support, Conformal Coating, Secure Erase

 Datasheet

 beta mSATA easy DS_v20.pdf

Note 1: Performance and Power Consumption may differ according to flash type, flash configuration, and platform.

Note 2: All reliability tests follow international standards



Search using keywords:

scope: