Industrial Half-Slim


Phison’s Half Slim SSD delivers all the advantages of flash disk technology with Serial ATA III interface, and one PCB design is fully compliant with the standard Half Slim form factor based on JEDEC MO-297 standard, and another one is fully compliant with standard 2.5-inch form factor which designed based on the standard 7-pin interface for data segment and 15-pin for power segment. This module provides low power consumption compared to traditional hard drive and hot-swapping when removing/ replacing/ upgrading flash disks, as well as operating at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 64GB for SLC Flash solution. Moreover, it can reach up to 550MB/s read as well as 310MB/s write high performance.

Product Specification





4GB up to 256GB

4GB up to 64GB


SATA 3.0

SATA 3.2

 Flash Memory


MLC/ Pseudo SLC/3D TLC

 Performance (Note1)

Read: up to 515 MB/s
Write: up to 180 MB/s

Read: up to 550 MB/s
Write: up to 310 MB/s

 Power Consumption (Note1)

 Active mode: < 1,660 mW

 Active mode: < 1,360 mW

 General Applications

Storage, Recording, Back up, Boot device, Database in Server, NAS, SAN, Surveillance, Industrial PC/machines

 Operating Voltage

 DC 5V

 Operating Temperature

 0°C ~ 70°C (Silver)
-40°C ~ 85°C (Diamond)


 -15°C ~ 85°C (New Silver)

-25°C ~ 85°C (Gold)

-40°C ~ 85°C (Diamond)

 Reliability (Note2)

IEC-60068, IEC-61000, MIL-STD-810, ISTA 2 Series


More than 2,000,000 hours


Products are tested with both operational and non-operational status to ensure the highest qualities.


Default: SmartRefreshTM, SmartFlushTM

Optional: GuaranteeFlushTM


SmartRefreshTM, End to End Data Path Protection,

SmartZipTM, SmartFlushTM

Optional: GuaranteeFlushTM


Industrial PS3109 Half Slim SSD simplified datasheet.pdf

Industrial PS3111 Half Slim SSD simplified datasheet.pdf

Note 1: Performance and Power Consumption may differ according to flash type, flash configuration, and platform.

Note 2: All reliability tests follow international standards