Industrial 1.8 inch PATA SSD

Descriptions

Phison’s 1.8” PATA solid state drive (SSD) is a non-volatile storage disk. With the advantages of lower power consumption, greater ruggedness, higher MTBF and other attracting features, SSD is becoming the mainstream to replace conventional hard disk drive (HDD). Due to lack of any mechanical components, SSD provides a more robust and cost effective storage solution for any embedded application. Since SSD is implemented with a standard ATA interface that is fully compatible with traditional HDD, designers will find SSD as an easy solution for integration in PC-based systems.

Product Features

 Solution

PS3016-P9

 Capacity

1~256GB

 Compliance

Standard ATA/IDE Bus Interface

 Flash Memory

SLC/MLC/pSLC

 Performance (Note1)

 Read: up to 80 MB/s
Write: up to 65 MB/s

 Power Consumption (Note1)

 Active mode: < 1200 mW

 General Applications

Storage, Recording, Back up, Boot device, and Database in Server, Industrial PC/machines, Military/Defense & Aero, Transportation System, Telecommunication, and Digital Signage interfaces.

 Operating Voltage

 DC 3.3V and 5.0V

 Operating Temperature

 0°C ~ 70°C (Silver)
-40°C ~ 85°C (Diamond)

 Reliability (Note2)

ATA serial specification, IEC, MIL-STD-810, ISTA 2 Series

 MTBF

More than 1,000,000 hours

 Quality

Products are tested with both operational and non-operational status to ensure the highest qualities.

 Features

Error Correcction Code (ECC), Static/Dynamic Wear leveling, Bad Block Management,Secure Erase,  Detect device info, pSLC

 Datasheet

 beta_1.8_PATA_SSD(P9)_SPEC_V1.0.pdf

Note 1: Performance and Power Consumption may differ according to flash type, flash configuration, and platform.

Note 2: All reliability tests follow international standards

 

 



Search using keywords:

scope: