Industrial 1.8 inch SATA SSD


Phison’s 1.8” SATA SSD delivers all the advantages of Flash Disk technology with Serial ATA III interface, including being fully compliant with standard 1.8-inch form factor, providing low power consumption compared to traditional hard drive and hot-swapping when removing/replacing/upgrading flash disks. The capacity could provide a wide range up to 512GB and the performance reach up to 500MB/s read as well as 480MB/s write based on Toshiba’s toggle MLC flash. Meanwhile, the power consumption is much lower than traditional Hard Drives.

Product Specification






SATA 3.0

 Flash Memory


 Performance (Note1)

Read: up to 500 MB/s
Write: up to 480 MB/s

 Power Consumption (Note1)

 Active mode: < 3,500 mW

 General Applications

Storage, Recording, Back up, Boot device, Database in Server, NAS, SAN, Surveillance, Industrial PC/machines

 Operating Voltage

 DC 3.3V

 Operating Temperature

 0°C ~ 70°C (Silver)
-40°C ~ 85°C (Diamond)

 Reliability (Note2)

IEC-60068, IEC-61000, MIL-STD-810, ISTA 2 Series
(Mechanical Shock Operation Test 1500 G, 0.5ms, Bending/Torque test, Drop test…)


More than 1,000,000 hours


Products are tested with both operational and non-operational status to ensure the highest qualities.


DEVSLP mode, Static/Dynamic Wear leveling, Error Correcction Code (ECC),Power Loss Protection, SMART Function, TRIM, Over-Provision, pSLC support, Conformal Coating, Secure Erase


 beta 18SSD easy DS_v20.pdf

Note 1: Performance and Power Consumption may differ according to flash type, flash configuration, and platform.

Note 2: All reliability tests follow international standards