Industrial CFast Card

Phison’s CFastTM delivers all the advantages of Flash Disk technology with the Serial ATA III interface and is fully compliant with the standard CFastTM form factor. Given the features of the low power consumption, small form factor, and high shock-resistance, CFastTM is an attractive solution to replace the conventional [PATA-interfaced] CompactFlash card in industrial applications or markets where performance is a major concern. CFastTM, consisting of a SATA-based 7-pin standard interface for data segment and 17-pin for power and controller segment, is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 64GB. Moreover, it can reach up to 510MB/s read as well as 150MB/s write high performance based on Toggle 2.0 SLC flash.

Product Specification








SATA 2.0

SATA 3.0

 Flash Memory


 Performance (Note1)

Read: up to 190 MB/s
Write: up to 185 MB/s

 Read: up to 520 MB/s
Write: up to 190 MB/s

 Power Consumption (Note1)

 Active mode: < 930 mW

 Active mode: < 1,600 mW

 General Applications

Storage, Recording, Back up, Boot device, Database in Server, NAS, SAN, Surveillance, Industrial PC/machines

 Operating Voltage

 DC 3.3V

 Operating Temperature

 0°C ~ 70°C (Silver)
-40°C ~ 85°C (Diamond)

 Reliability (Note2)

IEC-60068, IEC-61000, MIL-STD-810, ISTA 2 Series
(Mechanical Shock Operation Test 1500 G, 0.5ms, Bending/Torque test, Drop test…)


More than 1,000,000 hours

 More than 2,000,000 hours


Products are tested with both operational and non-operational status to ensure the highest qualities.


DEVSLP mode, Static/Dynamic Wear leveling, Error Correcction Code (ECC),Power Loss Protection, SMART Function, TRIM, Over-Provision, pSLC support, Secure Erase


 beta Cfast easy DS_v20.pdf

Note 1: Performance and Power Consumption may differ according to flash type, flash configuration, and platform.

Note 2: All reliability tests follow international standards

Search using keywords: